Floor as the part of the home design will hold major use to install. It will determine your room style to be. The Refinishing wood floors, as one of the flooring type can be a choice to install. But, how is this floor style exactly? Have you known how to refinish the wooden floor?
Here will be four types of Refinishing wood floors to be well done. You can begin by preparing the floor to refinish. Here, you need to remove the carpeting area and hammer down the protruding nail head. Make sure that the floors are clean enough. It needs to remove the tack stripping hat along the edge of your floor. If the tack stripping presents in the carpet, you can remove it previously before starting sanding. So, it will hit the areas that you will finish.
The second method comes with removing the old finishes by using sanding. Use the sanding for staining wood floors can buff the old scratched or the worn wood floor. You need also to prepare the perimeter. Now, you can use the sander for the floor to hit the flooring area that is not hit by the hand in detailed sanding. The last step in the second method of Refinishing wood floors is by saving the sawdust that is created by that sanding way.
For the next method, you can remove old finish floor using chemical stripper. The wood floor finishes can be done by using the chemical stripper in the sanding lieu. You can apply the strippers on area in 2 sq.ft. Now, let the stripper to sit for some minutes. Then, removing the strippers from wood is done. You need to follow the instruction from manufacturer to clean stripper from wood. Allow the floor area too completely dry and the last of Refinishing wood floors is by doing spot-sand the scratched or the worn areas.